top of page

Fire extinguishing with DSPA condensed aerosol

DSPA aerosol generators consist of a solid aerosolizing agent in a red non-pressurized canister that atomizes fine solid particles - an aerosol extinguishing agent. The aerosol is formed by the combustion of the solid aerosolizing agent, which is activated by an activation device, also known as a trigger device.

Set alle typen_edited.jpg

DSPA generators
for stationary use 11 series

Properties

 

  • Exceptional effective non-toxic fire extinguishing agent

  • Uniquely easy to install and Maintain

  • Tested as per EN 15276-1, NEN-ISO 15779, UL 2775 and BRL K23001

  • Approved by EPA for SNAP listing

  • Ecologically safe and environmentally friendly (O.D.P.=0, G.W.P.=0)

  • Very cost efficient

Description

 

Stationary DSPA aerosol generators can be used as part of a highly effective fire extinguishing system. The DSPA generator is not under pressure and is installed inside the room or compartment that needs to be protected. After activation, an aerosol cloud is generated, which increases in volume, filling the space and extinguishing the fire. DSPA generators are primarily intended for use in areas that are not normally occupied or used and are effective in Class A, B, C and F fires.

Translated with DeepL.com (free version)

Application

 

The 11 series stationary DSPA generators are recommended for protection of narrow rooms or objects such as suspended ceilings, raised floors, cable ducts, vehicles, switchgear, small rooms such as warehouses, archives, technical rooms and server rooms.

DSPA 11/1, 11/2
DSPA 11-1
DSPA 11-2_edited.png
DSPA 11/1
Passport
DSPA 11/2
Certificate
Passport
Certificate
DSPA 11/3, 11/4
Certificate
Passport
Certificate
DSPA 11-3.png
DSPA 11-4.png
DSPA 11/3
DSPA 11/4
DSPA 11/5, 11/6
DSPA 11/5
DSPA 11/6
Certificate
Certificate
DSPA 11-5.png
DSPA 11-6.png
AGS__11-7_edited_edited.png
Certificate
DSPA 11/7
DSPA 11/7

DSPA generators
stationary application 8 series

Application

 

The 8 Series stationary DSPA generators are recommended for the protection of large and extra-large premises or facilities, such as warehouses, archives, technical rooms and server rooms.

Properties

 

  • Exceptional effective non-toxic fire extinguishing agent

  • Uniquely easy to install and Maintain

  • Tested as per EN 15276-1, NEN-ISO 15779, UL 2775 and BRL K23001

  • Approved by EPA for SNAP listing

  • Ecologically safe and environmentally friendly (O.D.P.=0, G.W.P.=0)

  • Very cost efficient

Description

 

Aerosol generators DSPA 8-1, DSPA 8-1-60 and 8-2 can be used as part of a highly efficient fire extinguishing system. The DSPA generator is not under pressure and is installed inside a room or compartment that requires protection. After activation, an aerosol cloud is generated, which increases in volume, filling the space and extinguishing the fire. DSPA generators are primarily designed for use in spaces not normally occupied or used and are effective against Class A, B, C and F (K) fires. DSPA 8-1-60 has a very fast discharge time of less than 60 seconds, DSPA 8-1 and DSPA 8-2 have slower discharge times and, accordingly, less pressure generated.

8_1.png
DSPA 8/1
8_2.png
DSPA 8/1, 8/2
DSPA 8/2
Certificate
7_2_edited.jpg
7_2_edited.jpg
DSPA 7/1
DSPA 7/2
DSPA 7/1, 7/2

DSPA generators
operative application 

Application


DSPA series 5 generators are recommended for extinguishing fires in buildings and other structures. They can be used in all stages of a fire, but their value is best demonstrated during a fully developed fire or early deployment on any fire. The DSPA 5M generator is recommended for extinguishing fires on marine vessels and in other situations where there is an influence of moisture and salt. It can be used at any stage of the fire, but it works best when the fire is fully developed.

Properties

 

  • Exceptionally effective non-toxic extinguishing agent

  • Does not deplete oxygen levels

  • Included in the SNAP list of the US Environmental Protection Agency (EPA)

  • Environmentally safe and harmless to the environment (O.D.P.=0, G.W.P.=0)

  • Harmless to humans and animalsDoes not cause excessive pressure

DSPA 5/1
DSPA 5/1

Description

 

The DSPA Series 5 portable aerosol generators can be used by firefighters and professional first responders as a highly effective means of extinguishing fires. DSPA Series 5 generators are non-pressurized and manually deployed in a room or compartment that requires firefighting. Once activated, an aerosol cloud is generated, which expands in volume, flooding the space and knocking down the flames. DSPA Series 5 generators are primarily intended for use on Class A, B, C and F(K) fires.

BAS_8477.jpg
BAS_8500_edited.png
DSPA 5/2, 5/3
DSPA 5/2
Stap 3_edited.png
DSPA 5/3
DSPA 5/4
BAS_2211_edited_edited.png
DSPA 5/4, 5M
BAS_8500_edited.png
DSPA 5 М

DSPA generators
for stand-alone use

Application

 

DSPA stand-alone generators of the 12 series are recommended for fire protection of small volumes (electrical cabinets, engine compartments, etc.) and vehicles.

Properties

 

  • Exceptionally effective non-toxic extinguishing agent

  • Uniquely easy to install and maintain

  • Tested in accordance with EN 15276-1, NEN-ISO 15779, UL 2775 and BRL K23001

  • EPA approved for SNAP listing

  • Environmentally safe and harmless to the environment (O.D.P.=0, G.W.P.=0)

  • Very cost effective

DSPA 12-serie small_edited.png

Description

 

The DSPA 12 series stand-alone aerosol fire extinguishing systems with a thermal starter (DSPA 12-1, 12-2, 12-3, 12-4, 12-5) are designed to control and extinguish fires of flammable and combustible liquids, solid fuels and electrical equipment, including live electrical equipment. DSPA 12-1, 12-2, 12-3, 12-4 are also available with an electric starter that can be connected to the control module.

DSPA 12/1-12/5
DSPA_12.jpg
bottom of page